Species description
The TC-EH 250 hoist allows loads to be lifted safely around the house, garden and workshop at the touch of a button. Its extensive equipment is state-of-the-art. It is equipped with an 18-meter wire rope with a 3 mm cross-section. It lifts loads of up to 250 kg to a height of 5.7 m using a double wire on the pulley with load hooks. Without a single wire pulley, the maximum load is halved, while the lifting height increases to 11.5 m. The TC-EH 250 is equipped with numerous safety devices. The fully insulated control switch has an emergency stop function that is immediately switched off at the touch of a button. The robust motor is protected against overheating by a thermal safety switch. The twist-free wire rope prevents the load from rotating when lifted. A safety clip on the load hook prevents the load from accidentally falling, which is secured in each position by an automatic brake. For reliable end-position shutdown there is an automatic limit shutdown that ensures that the wire rope hoist is safely switched off in the end position. Two double clamps are available for securing the hoist. A suitable swivel arm is available separately for the BT-EH 250, which allows loads to be rotated, e.g. when lifting to higher levels and floors in floors.
- Cable 18 m (without twist, Ø 3.2 mm)
- Cylindrical guide with loading hook
- Power switch with emergency stop
- Motor with thermal switch
- Loading hook with safety catch
- Automatic brake secures the load in any position
- Automatic limit stop
- Fastening with two double clamps
